The Plasticene era: Current uncertainties in estimates of the hazards posed by tiny plastic particles on soils and terrestrial invertebrates.

Plastics are ubiquitous in our daily life. Large quantities of plastics leak in the environment where they weather and fragment into micro- and nanoparticles. This potentially releases additives, but rarely leads to a complete mineralization, thus constitutes an environmental hazard. Plastic pollution in agricultural soils currently represents a major challenge: quantitative data of nanoplastics in soils as well as their effects on biodiversity and ecosystem functions need more attention. Plastic accumulation interferes with soil functions, including water dynamics, aeration, microbial activities, and nutrient cycling processes, thus impairing agricultural crop yield. Plastic debris directly affects living organisms but also acts as contaminant vectors in the soils, increasing the effects and the threats on biodiversity. Finally, the effects of plastics on terrestrial invertebrates, representing major taxa in abundance and diversity in the soil compartment, need urgently more investigation from the infra-individual to the ecosystem scales.

Influence of trophic overlaps and trophic niche amplitude on microplastic intake of fish species in shallow areas of a neotropical coastal lagoon.

Plastic pollution is a global challenge that affects all marine ecosystems, and reflects all types of uses and activities of human society in these environments. In marine ecosystems, microplastics and mesoplastics interact with invertebrates and become available to higher predators, such as fish, which can ingest these contaminants. This study aimed to analyze how ecological food interactions (diet overlap and trophic niche amplitude) among fish species contribute to the ingestion of plastic particles. The gastrointestinal contents of six fish species (Atherinella brasiliensis, Eucinostomus melanopterus, Eucinostomus argenteus, Genidens genidens, Coptodon rendalli, and Geophagus brasiliensis) were analyzed to identify prey items and plastic ingestion. Based on the ontogenetic classification, A. brasiliensis, E. melanopterus, and G. genidens were divided into juveniles and adults, and the six fish species analyzed were divided into nine predator groups. Most of the plastics ingested by the fish species were blue microplastic (MP) fibers (< 0.05 mm) classified as polyester terephthalate, polyethylene, and polybutadiene. Considering all the analyzed predators, the average number and weight of plastics ingested per individual were 2.01 and 0.0005 g, respectively. We observed that predators with a high trophic overlap could present a relationship with the intake of MP fibers owing to predation on the same resources. In addition, we observed the general pattern that when a species expands its trophic diversity and niche, it can become more susceptible to plastic ingestion. For example, the species with the highest Levin niche amplitude, E. argenteus juveniles, had the highest mean number (2.9) of ingested MP fibers. Understanding the feeding ecology and interactions among species, considering how each predator uses habitats and food resources, can provide a better understanding of how plastic particle contamination occurs and which habitats are contaminated with these polluting substances.

Microplastic contamination in rivers: a survey from the Nan River, Thailand.

BACKGROUND: Since the 1970s, microplastic contamination has been discovered in various environments. These emerging pollutants threaten water quality and freshwater ecosystems. We aimed to assess microplastic contamination in the Nan River by quantifying their presence, characterising their morphology, and identifying their polymer composition. METHODS: The survey was conducted along the Nan River in northern Thailand, which is divided into three distinct zones based on land use (ie, community areas, agricultural areas, and natural areas). A wide array of samples, including surface water, sediment, and specimens from five aquatic species-Barbonymus altus, Laides hexanema, Kryptopterus cryptopterus, Pomacea canaliculata, and Pseudodon cambodjensis cambodjensis-were collected. The presence of microplastics was analysed via the wet peroxide oxidation process for sample digestion, morphological characteristics were assessed through microscopic examination, and Fourier transform infrared spectrophotometry was used to identify the polymer composition of the microplastics. FINDINGS: Natural areas had the highest mean concentration of microplastics in surface water (23·67 pcs/L, SD 14·22), whereas community areas had the highest mean concentration in soil sediment (24·67 pcs/g, 15·04). No statistically significant differences in the amounts of microplastics were observed among the various land-use zones. Microplastics were predominantly found in the gastrointestinal tracts of fish specimens, with varying quantities observed among different aquatic species; B altus had the highest concentration (11·80 pcs/g, 8·98). The primary microplastic shapes identified were filaments (53·99%), fragments (35·58%), and cylindrical forms (10·43%). We identified ten different polymer types, with polypropylene, nylons, and polymethyl methacrylate being the most prevalent among them. INTERPRETATION: Analysing microplastic pollution in this area brings attention to the issues affecting the rivers of Thailand and emphasises ecological risks, particularly microplastic presence in aquatic species. Because of the Nan River's ecological importance, we call for increased research and collaboration to address the increasing threat of microplastic pollution. FUNDING: Naresuan University.

[Characterization of Microplastic Surface Bacterial Community Structure and Prediction of Ecological Risk in Poyang Lake, China].

In recent years, the environmental pollution of microplastics in Poyang Lake has received increasing attention. Baisha Lake of Poyang Lake was selected as the study area, and samples of water and sediments of Baisha Lake and the microplastics therein were collected, and the polymer types of microplastics were identified as polyethylene (PE), polyester (PET), polypropylene (PP), and polystyrene (PS) using Fourier infrared spectroscopy. We also analyzed the structural composition of bacterial communities in water, in sediments, and on microplastic surfaces using 16S high-throughput sequencing. The species richness and diversity of bacteria on the microplastic surfaces were lower than those in the surrounding water and sediments. The results of NMDS analysis showed that the bacterial community structures on the microplastic surfaces differed greatly from those in the surrounding sediments and water. The bacterial community composition in water and sediment differed from that on the microplastic surfaces, and the dominant bacterial phyla on the microplastic surfaces were Proteobacteria and Bacteroidota, and their relative abundance on the microplastic surfaces was higher than that in sediment. The relative abundance of Proteobacteria was higher than that in water. The relative abundances of Bacteroidota and Actinobacteriota were significantly lower than that of water. Massilia and Pseudomonas were the dominant genera on the microplastic surfaces, and their relative abundances were significantly higher than those in the surrounding water and sediments. BugBase phenotype prediction revealed that the relative abundance of contains mobile elements, biofilm formation, potential pathogenicity, and stress tolerance phenotypes of microplastic bacterial communities were significantly higher than those of the surrounding water and sediments. The results revealed that microplastics may have contributed to the spread of harmful bacteria, including pathogenic bacteria, and increased the potential pathogenicity of bacterial communities. Additionally, microplastic surface bacterial communities had higher phenotypes of mobile gene element content. Revealing the potential harm of microplastic pollution to wetland ecology at the micro level may provide a scientific reference for maintaining the ecological stability of wetlands.

Regulatory Science Perspective on the Analysis of Microplastics and Nanoplastics in Human Food.

Microplastics are increasingly reported, not only in the environment but also in a wide range of food commodities. While studies on microplastics in food abound, the current state of science is limited in its application to regulatory risk assessment by a continued lack of standardized definitions, reference materials, sample collection and preparation procedures, fit-for purpose analytical methods for real-world and environmentally relevant plastic mixtures, and appropriate quality controls. This is particularly the case for nanoplastics. These methodological challenges hinder robust, quantitative exposure assessments of microplastic and nanoplastic mixtures from food consumption. Furthermore, limited toxicological studies on whether microplastics and nanoplastics adversely impact human health are also impeded by methodology challenges. Food safety regulatory agencies must consider both the exposure and the risk of contaminants of emerging concern to ascertain potential harm. Foundational to this effort is access to and application of analytical methods with the capability to quantify and characterize micro- and nanoscale sized polymers in complex food matrices. However, the early stages of method development and application of early stage methods to study the distribution and potential health effects of microplastics and nanoplastics in food have largely been done without consideration of the stringent requirements of methods to inform regulatory activities. We provide regulatory science perspectives on the state of knowledge regarding the occurrence of microplastics and nanoplastics in food and present our general approach for developing, validating, and implementing analytical methods for regulatory purposes.

Peptide-Decorated Microneedles for the Detection of Microplastics.

The escalating utilization of plastics in daily life has resulted in pervasive environmental pollution and consequent health hazards. The challenge of detecting and capturing microplastics, which are imperceptible to the naked eye, is exacerbated by their diminutive size, hydrophobic surface properties, and capacity to absorb organic compounds. This study focuses on the application of peptides, constituted of specific amino acid sequences, and microneedles for the rapid and selective identification of microplastics. Peptides, due to their smaller size and greater environmental stability compared with antibodies, emerge as a potent solution to overcome the limitations inherent in existing detection methodologies. To immobilize peptides onto microneedles, this study employed microneedles embedded with gold nanorods, augmenting them with sulfhydryl (SH) groups at the peptides' termini. The sensor developed through this methodology exhibited efficient peptide binding to the microneedle tips, thereby facilitating the capture of microplastics. Raman spectroscopy was employed for the detection of microplastics, with the results demonstrating successful attachment to the microneedles. This novel approach not only facilitates localized analysis but also presents a viable strategy for the detection of microplastics across diverse environmental settings.

Sunlight-Driven Photochemical Removal of Polypropylene Microplastics from Surface Waters Follows Linear Kinetics and Does Not Result in Fragmentation.

Floating microplastics are susceptible to sunlight-driven photodegradation, which can convert plastic carbon to dissolved organic carbon (DOC) and can facilitate microplastic fragmentation by mechanical forces. To understand the photochemical fate of sub-millimeter buoyant plastics, ∼0.6 mm polypropylene microplastics were photodegraded while tracking plastic mass, carbon, and particle size distributions. Plastic mass loss and carbon loss followed linear kinetics. At most time points DOC accumulation accounted for under 50% of the total plastic carbon lost. DOC accumulation followed sigmoidal kinetics, not the exponential kinetics previously reported for shorter irradiations. Thus, we suggest that estimates of plastic lifespan based on exponential DOC accumulation are inaccurate. Instead, linear plastic-C mass and plastic mass loss kinetics should be used, and these methods result in longer estimates of photochemical lifetimes for plastics in surface waters. Scanning electron microscopy revealed that photoirradiation produced two distinct patterns of cracking on the particles. However, size distribution analyses indicated that fragmentation was minimal. Instead, the initial population of microplastics shrank in size during irradiations, indicating photoirradiation in tranquil waters (i.e., without mechanical forcing) dissolved sub-millimeter plastics without fragmentation.

How many microplastics do you need to (sub)sample?

Analysis of microplastics in the environment requires polymer characterization as a confirmation step for suspected microplastic particles found in a sample. Material characterization is costly and can take a long time per particle. When microplastic particle counts are high, many researchers cannot characterize every particle in their sample due to time or monetary constraints. Moreover, characterizing every particle in samples with high plastic particle counts is unnecessary for describing the sample properties. We propose an a priori approach to determine the number of suspected microplastic particles in a sample that should be randomly subsampled for characterization to accurately assess the polymer distribution in the environmental sample. The proposed equation is well-founded in statistics literature and was validated using published microplastic data and simulations for typical microplastic subsampling routines. We report values from the whole equation but also derive a simple way to calculate the necessary particle count for samples or subsamples by taking the error to the power of negative two. Assuming an error of 0.05 (5 %) with a confidence interval of 95 %, an unknown expected proportion, and a sample with many particles (> 100k), the minimum number of particles in a subsample should be 386 particles to accurately characterize the polymer distribution of the sample, given the particles are randomly characterized from the full population of suspected particles. Extending this equation to simultaneously estimate polymer, color, size, and morphology distributions reveals more particles (620) would be needed in the subsample to achieve the same high absolute error threshold for all properties. The above proposal for minimum subsample size also applies to the minimum count that should be present in samples to accurately characterize particle type presence and diversity in a given environmental compartment.

Biomonitoring of microplastics, anthropogenic microfibres and glass retroreflective beads by marine macroalgae.

Microplastics and other microscopic debris are a concern in the coastal environment but measurements in the water column and sediment are often problematic and rely on non-standardised and highly variable methodologies. To this end, we explore the potential of different species of temperate-cold marine macroalgae as passive biomonitors of anthropogenic microparticles at three contrasting locations in southwest England. Specifically, fronds from samples of fucoids and Ulva lactuca (n = 9 in total, and three from each location) have been sectioned and analysed directly under a microscope and anthropogenic microparticles counted and subsequently characterised for chemical composition. Microparticles were heterogeneously distributed throughout sections from the same sample. However, on a dry weight basis, combined microparticle concentrations for each sample ranged from about 7.5 g-1 to 110 g-1, and from about 0.2 cm-2 to 0.9 cm-2, and for a given species were higher in samples from a semi-enclosed harbour and urban beach than in samples from a protected beach facing the open sea. These values compare with published concentrations of microplastics and microfibres reported for the regional water column on the order of 0.1 m-3. Most particles were cellulosic (e.g., rayon) and petroleum-based (mainly polyester and polyethylene terephthalate) fibres but plastic fragments were also present on most samples. Glass retroreflective beads derived from road markings were also present at up to 18 g-1 on fucoids from the urban beach because of its proximity to a stormwater effluent. Most microparticles were adhered to the smooth parts of the macroalgal surface but some displayed wrapping around edges and creases or entrapment by appendages. The practical and environmental implications of macroalgae passively capturing significant quantities of anthropogenic microparticles are discussed.

Identification and quantification of microplastics in salts by complementary approaches using pyrolysis-gas chromatography/quadrupole-time of flight mass spectrometry (Py-GC/QTOFMS) and laser direct infrared (LDIR) chemical imaging analysis.

Microplastics (MPs) and nanoplastics (NPs) have been suspected as contaminants in various foodstuffs, including salts, all over the world. Regarding the different sizes and polymer types, the mass concentrations of actual plastic particles in salt are not very clear. The purpose of this study is to develop a scalable method for qualitative and quantitative analysis of MPs and NPs by using Pyrolysis Gas Chromatography Quadrupole-Time of Flight mass spectrometry (Py-GC/QTOFMS) to detect their mass concentrations in salt samples. The targeted and suspected lists of polymers in salts were compiled based on the combined results of the high-resolution mass spectrometry (HRMS) full scanning with auxiliary MS dataset and the laser direct infrared (LDIR) chemical imaging analysis. The seven targeted MPs with polymer standards, i.e., polyvinyl chloride (PVC), polymethyl methacrylate (PMMA), polypropylene (PP), polystyrene (PS), polyethylene (PE), polyethylene terephthalate (PET), and polycarbonate (PC), were first subjected to a full MS scanning mode of the Py-GC/QTOFMS analysis. Subsequently, the parental masses of their pyrolysis compounds were used as the seeds to generate the related daughter masses. This process established both retention time and mass-pairs matching for the target MS/MS mode for enabling the identification and quantification of the particles. The suspected MPs with a matching degree >0.65 in the LDIR list were explored either by the full scan MS. Only PVC was identified, and PET was suspected. The Py-GC/QTOFMS result is complementary and comparable to the LDIR detection with the matching degree >0.85. We identified that PVC and PET (suspected) can be measured in both commercial and bulk sea salts, and their concentrations in sea salts are much higher than in rock salts, implying heavy contamination of the seawater.

Microplastics in drinking water: A review on methods, occurrence, sources, and potential risks assessment.

Microplastics in drinking water captured widespread attention following reports of widespread detection around the world. Concerns have been raised about the potential adverse effects of microplastics in drinking water on human health. Given the widespread interest in this research topic, there is an urgent need to compile existing data and assess current knowledge. This paper provides a systematic review of studies on microplastics in drinking water, their evidence, key findings, knowledge gaps, and research needs. The data collected show that microplastics are widespread in drinking water, with large variations in reported concentrations. Standardized methodologies of sampling and analysis are urgently needed. There were more fibrous and fragmented microplastics, with the majority being <10 µm in size and composed of polyester, polyethylene, polypropylene, and polystyrene. Little attention has been paid to the color of microplastics. More research is needed to understand the occurrence and transfer of microplastics throughout the water supply chain and the treatment efficiency of drinking water treatment plants (DWTPs). Methods capable of analyzing microplastics <10 µm and nanoplastics are urgently needed. Potential ecological assessment models for microplastics currently in use need to be improved to take into account the complexity and specificity of microplastics.

Contribution of different land use catchments on the microplastic pollution in detention basin sediments.

The assessment of microplastic (MP) pollution in urban areas is essential considering its abundance in freshwater, particularly due to urban wet weather discharge. The precise sources of MPs must be identified to better understand its characteristics. This study examines the relationship between MP pollution in detention basin sediments and land use in the investigated catchments. The study of stormwater management infrastructure, mainly in detention basins, has enabled the quantification of MP abundance in sediments conveyed by stormwater in urban areas. Sediment sampling was conducted in ten detention basins and one combined sewer overflow (CSO) structure in the Lyon metropolitan area, France. These basins correspond to stormwater outlets of representative urban catchment areas. MP extraction involves densimetric separation and organic matter degradation. MPs were then characterized using micro-Fourier infrared spectroscopy and siMPle software. This protocol identified MPs between 50 and 500 µm in the study sites. This study highlights the high abundance in the collected sediment samples, ranging from 2,525 to 1,218,82 MP kg-1 by dry weight sediment. The MPs found have a median size around 115 µm, making them very small MPs that are mainly composed of polypropylene followed by polyethylene and polystyrene or polyethylene terephthalate. The abundance of MPs in sediments is associated with the land use type. Catchments in predominantly industrial and commercial zones were more significantly polluted with MPs compared with those in predominantly agricultural or heterogeneous zones. Finally, statistical analyses revealed links between sedimentary and urban parameters and MPs concentrations. Several recommendations are given for future research, notably concerning the analyzing of stormwater sediments to understand the sources of MP pollution.

Mass quantification of nanoplastics at wastewater treatment plants by pyrolysis-gas chromatography-mass spectrometry.

Municipal wastewater treatment plants (WWTPs) play a crucial role in the collection and redistribution of plastic particles from both households and industries, contributing to their presence in the environment. Previous studies investigating the levels of plastics in WWTPs, and their removal rates have primarily focused on polymer type, size, shape, colour, and particle count, while comprehensive understanding of the mass concentration of plastic particles, particularly those <1 µm (nanoplastics), remains unclear and lacking. In this study, pyrolysis gas chromatography-mass spectrometry was used to simultaneously determine the mass concentration of nine selected polymers (i.e., polyethylene (PE), polypropylene (PP), polystyrene (PS), poly(ethylene terephthalate) (PET), nylon 6, nylon 66, polyvinylchloride (PVC), poly(methyl methacrylate) (PMMA) and polycarbonate (PC)) below 1 µm in size across the treatment processes or stages of three WWTPs in Australia. All the targeted nanoplastics were detected at concentrations between 0.04 and 7.3 µg/L. Nylon 66 (0.2-7.3 µg/L), PE (0.1-6.6 µg/L), PP (0.1-4.5 µg/L), Nylon 6 (0.1-3.6 µg/L) and PET (0.1-2.2 µg/L), were the predominant polymers in the samples. The mass concentration of the total nanoplastics decreased from 27.7, 18 and 9.1 µg/L in the influent to 1, 1.4 and 0.8 µg/L in the effluent, with approximate removal rates of 96 %, 92 % and 91 % in plants A, B and C, respectively. Based on annual wastewater effluent discharge, it is estimated that approximately 24, 2 and 0.7 kg of nanoplastics are released into the environment per year for WWTPs A, B and C, respectively. This study investigated the mass concentrations and removal rates of nanoplastics with a size range of 0.01-1 µm in wastewater, providing important insight into the pollution levels and distribution patterns of nanoplastics in Australian WWTPs.

Development of a polystyrene-based microplastic model for bioaccumulation and biodistribution study using radiotracing and nuclear analysis method.

The investigation of micro or nano plastics behavior in the environment is essential to minimize the hazards of such pollutants on humans. While the conventional method requires sophisticated procedures and a lot of animal subjects, the nuclear technique confers a sensitive, accurate, and real-time method using radiolabeled micro or nano plastics as a tracer. In this study, polystyrene sulfonate-based microplastic (PSM) was developed with a size of around 3.6 µm, followed by radiolabeling with iodine-131 (131I) or zinc-65 (65Zn) for microplastic radiotracer model. After a stability study in seawater, phosphate buffer saline (PBS), and human serum albumin (HSA) for fifteen days, PSM-131I remained stable (>90 %), except in HSA (50-60 % after day-9), while PSM-65Zn was unstable (<50 %).

Model-based estimation of seasonal transport of macro-plastics in a marine protected area.

Management of plastic litter in Marine Protected Areas (MPAs) is expensive but crucial to avoid harms to critical environments. In the present work, an open-source numerical modelling chain is proposed to estimate the seasonal pathways and fates of macro-plastics, and hence support the effective planning and implementation of sea and beach cleaning operations. The proposed approach is applied to the nearshore region that includes the MPA of Capo Milazzo (Italy). A sensitivity analysis on the influence of tides, wind, waves and river floods over the year indicates that seasonality only slightly affects the location and extension of the macro-plastic accumulation zones, and that beach cleaning operations should be performed in autumn. Instead, the influence of rivers on plastic litter distribution is crucial for the optimal planning of cleaning interventions in the coastal area.

Microplastics in three types of human arteries detected by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS).

Microplastics are ubiquitous in the environment. Human body can be exposed to microplastics through inhalation and ingestion and some microplastics can enter the blood and accumulate in various tissues and organs throughout the body. Animal experiments have suggested that microplastics may promote atherosclerosis. However, data on microplastics in human arteries and clinical evidence supporting a link between microplastics and atherosclerosis are currently lacking. Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) was used in this study to detect microplastics in three types of human arteries: coronary and carotid arteries with atherosclerotic plaques, as well as the aorta without plaques. Microplastics were detected in all 17 arterial samples, with an average concentration of 118.66 ± 53.87 µg/g tissue. Four types of microplastics were identified: polyethylene terephthalate (PET, 73.70%), polyamide-66 (PA-66, 15.54%), polyvinyl chloride (PVC, 9.69%), and polyethylene (PE, 1.07%). Most importantly, the concentration of microplastics in arteries containing atherosclerotic plaques, both coronary arteries (156.50 ± 42.14 vs. 76.26 ± 14.86 µg/g tissue, P = 0.039), and carotid arteries (133.37 ± 60.52 vs. 76.26 ± 14.86 µg/g tissue, P = 0.015), was significantly higher than that in aortas which did not contain atherosclerotic plaques, suggesting that microplastics might be associated with atherosclerosis in humans. This study provides valuable data for further hazard assessments of microplastics on human cardiovascular health.

Time-varying microplastic contributions of a large urban and industrial area to river sediments.

The quantification of microplastic (MP) pollution in rivers is often constrained by a lack of historical data on a multi-decadal scale, which hinders the evaluation of public policies. In this study, MP contents and trends were analyzed in dated sediment cores sampled upstream and downstream of a large metropolis, in environmental deposits that exhibited consistent sedimentation patterns from the 1980s to 2021. After a thorough sedimentological analysis, MPs were quantified in samples by micro Fourier Transform InfraRed spectroscopy (µFTIR imaging) and a density separation and organic matter digestion procedure. Microplastics recorded in the upstream core are relatively ubiquitous all along the dated sequence. The results also confirmed a sever increase of microplastics levels in the downstream core, by one order of magnitude, and an increase of polymer types. Polypropylene, polyethylene, and polystyrene represent ubiquitous contamination and were predominant at the two stations, whereas polyvinyl chloride and polytetrafluoroethylene were suspected to be abundant at the downstream station, but were not detected at the upstream station. Their presence could be linked to local contamination from specific industrial sources that manufactured and utilized these polymers. Surprisingly, in the downstream station sediment has recorded a relative improvement in polymers associated with industrial sources since the 2000s and, to a lesser extent, for ubiquitous ones since the 2010s. This trend of mitigation diverges from that of global assessments, that assume uncontrolled MP pollution, and suggest that European Union wastewater policy and regulation on industrial discharges have positively influenced water quality, and certainly also on MPs. However, the accumulation of microplastics remains high in recent deposits and raises the emerging concern of the long-term management of these reservoirs.

Microfluidic Detection and Analysis of Microplastics Using Surface Nanodroplets.

Detection of microplastics from water is crucial for various reasons, such as food safety monitoring, monitoring of the fate and transport of microplastics, and development of preventive measures for their occurrence. Currently, microplastics are detected by isolating them using filtration, separation by centrifugation, or membrane filtration, subsequently followed by analysis using well-established analytical methods, such as Raman spectroscopy. However, due to their variability in shape, color, size, and density, isolation using the conventional methods mentioned above is cumbersome and time-consuming. In this work, we show a surface-nanodroplet-decorated microfluidic device for isolation and analysis of small microplastics (diameter of 10 µm) from water. Surface nanodroplets are able to capture nearby microplastics as water flows through the microfluidic device. Using a model microplastic solution, we show that microplastics of various sizes and types can be captured and visualized by using optical and fluorescence microscopy. More importantly, as the surface nanodroplets are pinned on the microfluidic channel, the captured microplastics can also be analyzed using a Raman spectroscope, which enables both physical (i.e., size and shape) and chemical (i.e., type) characterization of microplastics at a single-particle level. The technique shown here can be used as a simple, fast, and economical detection method for small microplastics.

Microplastics contamination in aquaculture-rich regions: A case study in Gresik, East Java, Indonesia.

The widespread use of plastic has resulted in the accumulation of plastic waste across a range of sizes, notably including microplastics (MPs). The introduction of MPs into aquatic ecosystems can lead to the contamination of organisms, mainly fish. This study reports for the first time a quantitative and qualitative analysis conducted on the abundance of MPs encountered in water and sediment of milkfish aquaculture ponds in Gresik, East Java, Indonesia. Water and sediment samples were collected at three stations between February to April 2021. The abundance of MPs was analyzed through the application of one-way ANOVA tests and Pearson's correlation analysis. The results identified four types of MPs: fragments, fibers, films, and pellets. The highest abundance of MPs in both water (10.40 particle/L) and sediment samples (1.15 particle/g) was observed in March. The predominant MPs size in the water samples is 100-500 µm, while it is below 100 µm in the sediment. The color of the MPs varied across eight colors: black, purple, red, blue, yellow, pink, green, and transparent. The identification of MPs polymers was found to be polypropylene (PP), Polyurethane (PU), Polycarbonate (PC), Polyethylene terephthalate (PETE), High-density polyethylene (HDPE), and low-density polyethylene (LDPE). The presence of MPs in the water column and sediments was correlated with human activities around the ponds. Hence, the abundance of MPs is a source of pollution that has the potential to damage the nutritional quality of farmed milkfish. This study provides important information for the local governments to develop waste management policies for a cleaner environment and improved human health.

Cory's shearwater as a key bioindicator for monitoring floating plastics.

The potential of using organisms as bioindicators of marine litter has been an area of general interest in multiple scientific and monitoring programs across the globe. Procellariiformes seabirds are particularly vulnerable to plastic contamination, which makes them a research focus group. This study investigated plastic ingestion in deceased fledglings and adults Cory's shearwaters (Calonectris borealis) collected over eight years (2015 to 2022) at two Atlantic archipelagos: the Azores and the Canaries. Necropsies were carried out in a total of 1,238 individuals showing a high prevalence of plastic ingestion (90%), with approximately 80% of items recovered from the gizzard. Fledglings carried greater plastic loads compared to adults, yet plastic morphologies were similar between both age classes. The temporal analyses conducted with generalised additive mixed-effect models revealed a distinct temporal trend in plastic numbers, but not in terms of plastic mass. In addition, the spatial analyses showed that Cory's shearwaters from the Canary Islands ingest a higher quantity of plastic and a greater proportion of threadlike items than the Azorean birds. These results suggest higher contamination at the NW Africa foraging grounds next to the Canaries and highlight fisheries as a potential source of marine litter in that region. On the other hand, the information gathered from the Azorean birds suggests they would be able to monitor changes in the composition of the plastic items floating in the North Atlantic Subtropical Gyre. Overall, our outcomes support the use of Cory's shearwater fledglings that are victims of light pollution as a key bioindicator of plastic contamination in the North Atlantic. For its policy application, the presented threshold value in combination with the assessment method will enable effective tracking of floating plastic litter in the framework of the MSFD and OSPAR.